Dosing & Metering Pumps Malaysia | Fluid Prowess

Dosing and metering pumps in Malaysia

Accurate chemical dosing protects pipelines, membranes and boilers, and keeps processes in specification. Fluid Prowess supplies Wanner Hydra-Cell seal-less dosing and metering pumps for chemical injection, water treatment and process duties, including ATEX models for hazardous areas.

How a chemical dosing system works A dosing pump draws chemical from a tank and injects a precise amount into the main process line. Chemical tank Dosing pump Main process line (water, oil or gas) Precise amount injected here
Simplified chemical dosing setup.

What is a dosing pump?

A dosing pump, also called a metering pump, adds a precise, controlled amount of chemical into a process, often against high pressure. It is a positive displacement pump: each stroke delivers the same volume, so the dose can be set accurately by adjusting the pump’s speed or stroke.

Getting the dose right matters. Too little chemical and corrosion, scaling or contamination sets in; too much and you waste chemical, money and sometimes damage equipment.

Standard dosing pump vs Hydra-Cell metering pump

Many dosing pumps are small electronic diaphragm pumps built for light water treatment duties. Wanner Hydra-Cell metering pumps are built for the demanding end of the market.

FactorHydra-Cell metering pumpTypical solenoid dosing pump
PressureUp to 241 barLow to moderate
DiaphragmHydraulically balanced, low stressMechanically driven, flexes under full pressure
SealsSeal-less, no leak pathVaries by design
FlowVirtually pulse-free, linear across the turndown rangePulsed strokes
Standards and certificationP and MT Series meet or exceed API 675; ATEX modelsUsually for general duty
Best forOil and gas injection, high-pressure and critical dosingLight water treatment dosing

Wanner Hydra-Cell dosing and metering pumps we supply

Fluid Prowess is Wanner Engineering’s authorised distributor in Malaysia.

Wanner Hydra-Cell ATEX metering pumps for explosive areas

Metering and dosing: ATEX / explosive areas

For chemical dosing where the pump must be certified for an explosive atmosphere.

Up to 6,360 L/h and 241 bar.

  • G03/G13
  • G04
  • G10
  • G15
  • G25
  • G35
  • MT8 LP ATEX Zone 1
  • MT8 MP ATEX Zone 1
  • P200
  • P300
  • P400
Wanner Hydra-Cell metering pumps with electronic control for safe areas

Metering and dosing: safe areas, electronic control

For accurate dosing with electronic control in non-hazardous areas.

Up to 8,280 L/h and 241 bar.

  • G03
  • G04
  • G10
  • G15
  • G25
  • G35
  • MT8 LP
  • MT8 MP
  • P100
  • P200
  • P300
  • P400
  • P500
  • P600
Wanner Hydra-Cell pumps with plastic heads for corrosive chemicals

Plastic pump heads for corrosive chemicals

Selected models can be fitted with non-metallic pump heads for aggressive chemicals.

Polypropylene up to 17 bar, Polyvinylidene Fluoride (PVDF) up to 24 bar, up to 60°C.

See the full Wanner range · How Hydra-Cell works

Why Hydra-Cell for dosing

No leaks

Seal-less design with no packing or mechanical seals in contact with the chemical.

Runs dry without damage

An empty chemical tank won’t destroy the pump.

Accurate, linear flow

Flow stays in step with speed, so a VFD gives precise dose control.

Handles dirty chemicals

Copes with abrasives up to 800 microns.

Dosing pump applications

  • Oil & gas chemical injection: methanol, glycol and corrosion inhibitor
  • RO water: antiscalant dosing
  • Boiler and cooling water: water treatment chemicals
  • pH control: acid and caustic dosing
  • Wastewater treatment: coagulants and treatment chemicals
  • Refining & petrochemical: process additives

Frequently asked questions

What is the difference between a dosing pump and a metering pump?

There is no real difference. Both terms describe a pump that delivers a precise, controlled amount of liquid, usually a chemical, into a process. “Metering pump” is more common in oil and gas and process industries, while “dosing pump” is common in water treatment.

Is a dosing pump a positive displacement pump?

Yes. A dosing pump delivers the same volume with every stroke, which is what makes accurate dosing possible. Wanner Hydra-Cell metering pumps are seal-less, hydraulically balanced diaphragm pumps.

Which dosing pump is suitable for hazardous areas?

For explosive atmospheres you need an ATEX-certified pump. Wanner Hydra-Cell offers ATEX metering pumps, including MT8 ATEX Zone 1 and P Series models.

Can a dosing pump handle corrosive chemicals?

Yes, with the right materials. Selected Hydra-Cell models can be fitted with polypropylene or PVDF pump heads for aggressive chemicals, within their pressure and temperature limits.

Where can I buy dosing pumps in Malaysia?

Fluid Prowess is Wanner Engineering’s authorised distributor in Malaysia and supplies Hydra-Cell dosing and metering pumps, spare parts and calibration support. Contact us with your chemical and duty.

Need to dose a chemical accurately?

Send us the chemical, dose rate, injection pressure and area classification. We’ll recommend the right Hydra-Cell metering pump.