Frequently asked questions
What is a drum pump?
A drum pump, also called a barrel pump, is a portable pump with a long tube that goes into a drum, tote or tank through the bung opening. A motor on top drives an impeller or pumping element at the bottom of the tube, lifting the liquid out through a discharge hose without tipping the container.
What is the difference between a sealless and a sealed drum pump?
Sealless drum pumps have no mechanical seal in the tube, which improves reliability with thin, corrosive liquids. Sealed drum pumps use a seal and suit a wider range of liquids, including higher-viscosity products, depending on the series.
Can a drum pump transfer flammable liquids?
Yes, with the right configuration. Use a stainless pump (EFS, SFS, PFS, TBS, TTS, BTS or HVDP) with an air or explosion-proof motor and a static protection kit. A plastic pump or a standard motor can start a fire.
Which drum pump is best for viscous liquids?
It depends how thick it is. PF handles up to 2,000 cP and TT up to 2,000 cP on an air motor. BT covers 2,000 to 15,000 cP, such as gear oil, resins and adhesives. Above 15,000 cP, or when you need pressure to push through long lines, choose the HVDP, which handles up to 100,000 cP.
What drum pump tube length do I need?
Choose a tube that reaches near the bottom of your container. As a guide, a 40 in tube suits a standard 200 L drum, and a 48 in tube suits a 1,000 L IBC. EF, SF and PF tubes come in lengths from 16 in to 72 in, depending on the series.
Can a drum pump run dry?
No. Finish Thompsonâs manuals say never to run the pump dry, and never against a closed valve for more than a minute. The liquid cools and lubricates the bearings, and on the HVDP the stator. Switch off as soon as the container is empty.
Where can I buy FTI drum pumps in Malaysia?
Fluid Prowess is the master distributor of Finish Thompson (FTI) pumps in Malaysia, supplying drum and barrel pumps, motors, spare parts and accessories, with selection support. Contact us with your liquid and container size.